6 choosing basic range – Furuno FCV-1100L User Manual
Page 19
1. OPERATIONAL OVERVIEW
1-11
1.6
Choosing Basic Range
The basic range may be chosen with the [RANGE] switch from the eight ranges
listed below. These eight ranges may be programmed as desired on the RANGE
SETTING menu. For details, see page 3-5.
R A N G E
3 0 f t
6 0 f t
2 5 0 f t
5 0 0 f t
1 0 0 0 f t
1 6 0 0 f t
3 0 0 0 f t
1 2 0 f t
Range setting window (example: feet)
Basic ranges (default settings)
Range Switch Position
Range Unit
1 2 3 4 5 6 7 8
Feet (default)
30
60
120
250
500
1000
1600
3000
Meter 10
20
40
80
150
300
500
1000
Fathom 5
10
20
40
80
160
250
500
Hiro
(Japanese) 6 12 25 50 100 200 300 600
Passi/Braza
6 12 25 50 100 200 300 600
Note 1:
This setting must be done within five seconds after rotating the [RANGE]
switch once, otherwise the range window will be erased.
Note 2:
Range for high and low frequencies can be set separately.
Note 3:
The unit of depth measurement may be chosen from the SYSTEM
SETTING menu. For details, see DEPTH UNIT on page 3-2.