Furuno FCV-1100L - Manual (Page 37)

2. MENU OPERATION
2-7
4. Press the [▲] or [▼] key to choose the alarm which you want to set.
5. Press the [-] or [+] key to show the alarm setting window.
OFF ON OFF FISH BTM-FISH OFF WITHIN RANGE OUT OF RANGE
Bottom alarm Fish alarm Temp alarm
Alarm setting window
6. Press the [-] or [+] key to choose the alarm type desired.
7. Press the [▼] key twice to choose ALARM DEPTH (TEMP LIMIT for temp
alarm).
8. Press the [-] or [+] key to show the alarm setting window.
0 m
Starting depth setting window (example: bottom alarm)
9. For BOTTOM ALARM and FISH ALARM, press the [-] or [+] key to set the
starting point of alarm zone. Alarm marker appears (Depth alarm: green, Fish
alarm: white). The starting depth is measured from the transducer surface for
BOTTOM ALARM and FISH ALARM, from the bottom for BTM-FISH (bottom
fish) alarm.
BTM
Alarm area
Alarm marker
Bottom alarm (green): right side
Fish alarm (white): right side
Bottom-fish alarm (white): left side (vertical screen division)
right side (horizontal screen division)
Selected alarm (flashing)
Start line
12.5
ft
Setting of alarm zone (ex. Bottom alarm)
10. Press the [▼] key to choose ALARM ZONE.
11. Press the [-] or [+] key to show the alarm zone setting window.
10 ft
Alarm zone setting window (ex. Bottom alarm)
12.Press the [-] or [+] key to set the alarm zone. For depth alarm and temp alarm,
go to step 16. To set the fish alarm, go to step 13.
13. Press the [▼] key to choose ALARM LEVEL.
14. Press the [-] or [+] key to show the level setting window.
MIN MID MAX
Level setting window