FUJITSU CM71-00329-7E - Manual (Page 133)

123
CHAPTER2 Dependence Functions
■ How to set
Set the data watch break as follows.
• Data watch break (hardware)
• Command
- SET BREAK/DATAWATCH
• Dialog
- "Code" tab in breakpoint setting dialog
• Data watch break (software)
• Command
- SET BREAKCONDITION
- SET BREAK/BREAKCONDITION
• Dialog
- "Data Watch Conditions" in breakpoint detail setting dialog
Notes:
Data watch break (hardware)
• This function can be used only when the FR60Lite is used. For details, refer to "2.3.4 Break".
• This function cannot be used when the performance mode is set as the event mode. For details,
refer to "1.6 SET MODE" in "SOFTUNE Workbench Command Reference Manual".
Data watch break (software)
• When setting data watch break (software), the monitoring function cannot be used.