FUJITSU CM71-00329-7E User Manual
Page 182
172
CHAPTER2 Dependence Functions
Notes:
•
Do not set the code break to an instruction placed in a delay slot. If a code break is set and the
branch instruction is executed, the following phenomenon occurs.
Hardware: A break set in the delay slot does not occur.
•
When setting a breakpoint, always specify the starting address of the instruction. A break may not
occur if an address other than the starting address is specified.
•
A code break shares points with the following functions. The maximum number of code breaks
varies depending on how those functions are used.
- Data break
- Data watch break
- Trace trigger
- Sequencer
•
When hardware or hardware/count break is set at the top of the reset handler, the break does not
occur.
•
When the pass count mode is the passing count break mode, the hardware/count break cannot
be used. For details, refer to "2.4.3.2 Switching Debug Function".