Frymaster Y/KSCF/C/HC18G - Manual (Page 24)

Y/KSCF/C/HC18G HIGH EFFICIENCY COOL ZONE SERIES GAS FRYERS
CHAPTER 3: INSTALLATION INSTRUCTIONS
3-11
3.8 Safety Switches (cont.)
C. Filtering: Drain Valve and Oil Return Handles
1. Drain Valve Handle: RED HANDLE.
Push the red handle (located in the fryer
cabinet) to the right to open the drain
valve when filtering. After all oil has
drained from the frypot and/or polishing
is complete, push the red handle left to
close the drain valve.
2.
Oil Return Handles: YELLOW LABEL.
The oil-return handles to the left and right
in the fryer cabinet return oil at the rear of
the pot, which flushes oil across the
bottom of the vat, washing debris toward
the drain. The oil-return handles in the
center of the cabinet return oil through the
over-the-top system. Ensure the faucet is
positioned over the emptied vat before
running oil through the over-the-top
return system.
See Chapter 5 for more information on filtering.
See Chapter 7 for troubleshooting information.
DANGER
Always ensure that the over-the-top oil return faucet is located over the frypot or an
appropriate container before activating the over-the-top oil return system. If not, the
hot oil will spill and may cause burns.
DANGER
Allow oil to cool to 100°F (38°C) before draining into a metal container, stockpot, or
disposal unit.
DANGER
When draining oil into a disposal unit or portable filter unit, do not fill above the
maximum fill line located on the container.
Drain valve handles (red). Rear flush
handle
Over-the-top return
handles
Rear flush
handle