Furuno GPS NAVIGATOR GP-150 - Manual (Page 44)

6. SETTING UP VARIOUS DISPLAYS
6-4
6.3 Demo Display
The demo display provides simulated
operation of this unit. Own ship tracks, at the
speed selected, a figure eight course, starting
from position entered. All controls are
operative; you may change course, enter
marks, etc.
1) While pressing and holding down NU/CU
ENT, turn on the power. After the test
results appear, the Simulation Mode
menu appears.
_ _ °
Demo Setting
ENT: Enter
: Column : Cursor
_ _._ _ _’ N _ _ _ °_ _._ _ _’ W
Base Position
Speed
00.0 kn
: N/S, E/W
Figure 6-6 Simulation mode menu
2) Key in latitude of initial position.
3) If necessary, press
to switch from
north latitude to south latitude or vice
versa.
4) Key in longitude.
5) If necessary, press
to switch from
east longitude to west longitude or vice
versa.
6) Press key.
7) Key in speed.
8) Press the NU/CU ENT key to start the
simulation mode.
The icon S appears in the plotter 1, 2, and
highway display. All controls are
operative.
Note: The return to the normal mode, turn
off the power and then turn it on
while pressing and holding down
NU/CU ENT key.
Note: When the memory is cleared while
in the demonstration mode, the
equipment starts up in the normal
mode.