Yamaha CDX-497 - Manual (Page 18)

16
En
1
Press to stop the playback.
* The peak level search function of this unit is useful for
adjusting recording level on the tape deck. (For details,
refer to page 20.)
2
If desired, you can automatically insert additional
time space between tracks. (For details, refer to
page 11.)
3
Press TAPE to show the total possible recording
time of the tape on the display.
You can select any of the four tape lengths by
pressing TAPE.
SPACE
46
60 90
54
The unit can program tracks on a disc for recording onto tape. By considering the total possible recording time of the tape, the
unit automatically programs tracks or help you program tracks so they fits onto the tape with the least amount of unrecorded
space at each end of the tape.
TRACK PROGRAMMING FOR RECORDING TO TAPE
If desired, you can also enter the total possible
recording time of the tape manually.
Example: For a C-64 tape (32 minutes on each side),
press “6” and “4”.
+
4
Press REPEAT.
The unit automatically programs tracks for both side
A and side B considering the total time of the tape.
5
Start recording on the tape deck, and then press
on the remote control of this unit.
6
This unit automatically pauses at the end of the side
A. Turn the tape over to the side B, resume
recording on the tape deck, and then press
or
on the remote control of this unit to start
playback.
(off)
SEARCH
SYNCHRO TAPE PEAK SPACE
REPEAT
DIMMER RANDOM
INDEX 0 9
6 5 8 7
2 1 4 3
A–B PROGRAM CLEAR
3
3
2
SEARCH
TIME/INFO
FOLDER
SYNCHRO TAPE PEAK SPACE
REPEAT
DIMMER RANDOM
A–B PROGRAM CLEAR
4
1
6
5, 6
TAPE
6 4
REPEAT
The unit automatically programs tracks on a disc with their original order.
Automatic tape-programming (for Audio CD)
AUTO SPC ON
“ TAPE 46 ” appears.
01_En_02_BOD_CDX-397_497_G.pm 4/27/06, 3:06 PM 16