Meridian Audio 565 - Manual (Page 35)

Configuring the digital surround processor
31
To set up speaker protection for 5.1
sources
Because of the high bass levels that 5.1 channel sources are
capable of reproducing, the digital surround processor allows
you to set up automatic protection of each full-range speaker or
subwoofer in your system.
● Press
> or < until you see a display
such as:
1 Size Max
● Press
A or V to specify the volume of bass that the speaker
can withstand, according to the table opposite.
A setting of Max corresponds to no protection, and 0
corresponds to full protection.
The following table gives suggested settings for different types
of speaker. Generally reflex or active speakers can take a higher
score. As a guideline, add 2 for a reflex design.
For Meridian DSP Loudspeakers set Size to Max.
Size of 1 bass 2 bass 3 bass
drivers unit units units
6 inch 0 4 8
8 inch 4 10 14
10 inch 8 14 18
12 inch 14 20 24
15 inch 20 26 30
To specify the output precision
If you are using Meridian DSP Loudspeakers set the output
precision to 22 bits as follows:
● Press > or < until you see a display
such as:
1 22 Bits
● Press A or V to set the value to 22 bits.