Meridian Audio 565 - Manual (Page 55)

Setting up sources
51
To set up a system with two Meridian
CD players
● Configure the source you are going to use for the first CD
player.
For example: Source CD, Label C1, Audio input Digit.In, Comms
type 1C, Address 1A.
● Configure the source you are going to use for the second CD
player, with a different address.
For example: Source CDR, Label C2. Audio input Opt.In,
Comms type 1C, Address 2A.
You will also need to configure this CD player to have the same
address; eg 2A.
The Meridian System Remote will now automatically control
whichever of the CD players you have selected with the CD or
CDR source keys.
To set up two sources for DVD, one
for audio CDs and one for video DVDs
● Configure the source key you are going to use for audio CDs
with the digital input, and an appropriate 2-channel preset.
For example: Source CD, Label CD, Audio input Digit.In,
2-channel preset Trifield.
● Configure the source key you are going to use for video DVDs
with the digital input, and an appropriate Digital preset.
For example: Source DVD, Label DV, Audio input Digit.In, Digital
preset Digital.