Troubleshooting, Hiss starting dts laserdiscs, Sound not clear – Meridian Audio 565 User Manual

Page 61: Centre not working, There is a hiss when starting dts laserdiscs

Advertising
background image

Troubleshooting

57

Sound not clear

❍ If speech sounds muffled in a system with a centre speaker,

check that sound is coming from the centre as there may be a

connection problem. In a digital or Meridian feed to the centre

you may have set it up to be right instead of left so that it is

playing a subwoofer signal.

❍ If speech sounds muffled in a system with no centre speaker,

you may have selected a layout that expects one. See

Specifying the speaker layout, page 22.

Centre not working

There may be a connection problem.

❍ In a digital or Meridian feed to the centre, you may have set it

up to be right instead of left, and therefore it may be playing a

subwoofer signal.

There is a hiss when starting DTS
LaserDiscs

The DTS audio stream is indistinguishable from a PCM audio

stream; the 565 takes 30 msec to identify the encoding, during

which a hiss is heard.

❍ With non-video DTS sources you can add a 30 msec delay to

avoid this. However, with video sources the delay would

cause a noticeable sync problem, so the hiss is unavoidable.

Advertising