4 quick start 13, 1 unpacking 13, 2 use proper care with the 1522 and accessories 13 – Fluke 1522 User Manual
Page 16: 3 learn about the features and components 13, Quick start, Unpacking, Use proper care with the 1522 and accessories, Learn about the features and components, 4quick start, 1 unpacking
4
Quick Start
This section briefly explains the basics of setting up and operating your ther-
mometer readout.
4.1
Unpacking
Carefully unpack the 1522 and accessories and inspect them to make sure all
components are present and in satisfactory condition. Verify that the following
items are present:
• 1522 Thermometer Readout
• AC Adapter (clamp-on ferrite installed)
• Serial Cable
• User's Guide
• Report of Calibration
• Calibration Label
• Passcode Notice
• INFO-CON Connector
• Clamp-on ferrite with installation instructions for probe
• Probe (optional—must be purchased separately)
If all items are not present, contact an Authorized Service Center (see Section
1.3).
4.2
Use Proper Care with the 1522 and Accessories
First and most important is to understand the safety issues related to the 1522
and its accessories. Be aware that potential hazards exist due to high tempera-
tures, high voltages, and battery chemicals. Carefully read Section .
CAUTION: The 1522 and any thermometer probes are sensitive instru-
ments that can be easily damaged. Always handle these devices with care.
DO NOT allow them to be dropped, struck, stressed, or overheated.
4.3
Learn About the Features and Components
Familiarize yourself with the features and accessories of the 1522 by reading
Section 5.
13
4 Quick Start
Unpacking