Fluke 1522 - Manual (Page 20)

Display-The display shows the current temperature (or resistance) measure-
ment on the large numeric upper portion of the display. It can also show a vari-
ety of information on the smaller alphanumeric lower portion such as
minimum, maximum, delta(x), and other instrument settings.
Power and Backlight button-This button turns the instrument on or off. If the
power is on, pressing the button for three seconds toggles the backlight on or
off (see Section 6.3). Note: using the backlight drains the battery more quickly.
ENT (enter) button-This button is pressed to accept changes to a setting and,
in some modes, to store the most recent measurement.
CLR (clear) button-This button cancels changes to a setting and in the
MIN/MAX mode resets the minimum and maximum to the last measurement.
Up and Down buttons-These buttons are used to change values and settings.
MODE button-This button advances through operating modes and program-
ming functions (see Section 7).
1522 Handheld Thermometer Readout
User’s Guide
18