Furuno GP-33 - Manual (Page 17)

1. OPERATIONAL OVERVIEW
1-7
Satellite Monitor Display
The satellite monitor display shows the condition of GPS and GEO (WAAS) satellites.
Number, bearing and elevation angle of all GPS and GEO satellites (if applicable) in
view of your receiver appear.
User Display 1, User Display 2
• Digital display
The digital display shows digital navigation data. You can select what data to dis-
play in one to four cells. The choices of data are time, date, speed over ground,
cross-track-error, odometer distance, position, course over ground, time-to-go to
destination, trip distance, power source voltage, range and bearing to waypoint and
estimated time of arrival at destination.
• Speedometer display
The speedometer display provides both digital and analog displays of speed over
ground.
• COG display
The COG display shows both analog course over ground, and digital speed over
ground.
Receiver
signal level
Bars show
signal level.
Satellites
whose signal
level are high
are used in
fixing position.
DOP value
Elevation
45
Elevation 5
Altitude
Satellite numbers in
reverse video are
used for positioning.
Receiver
status
1.60
12.0 133
32
30
28
25
22
17
15
13
11
08
05
02
05
02
25
05
02
3230
17
13
22 08
11
GEO satellite
Area not used
for positioning
(set at menu)
Digital display (four cells) Speedometer display COG display
40.0
N
E
40.0
23.9 15.8
55.7 335
(default: User display 1)
(default: User display 2)