Furuno GP-33 - Manual (Page 22)

2. PLOTTER DISPLAY OVERVIEW
2-2
Cursor state and position indication
Cursor position is displayed in latitude and longitude or TDs at the bottom of the plotter
display when the cursor is shown.
If there is no operation for about seven seconds, the cursor disappears.
2.3 How to Shift the Display
The display can be shifted on the plotter display.
1. Press the cursorpad to show the cursor.
2. Press and hold down an arrow on the cursorpad.
When the cursor is placed at an edge of the screen, the display shifts in the direc-
tion opposite to cursorpad operation.
Centering own boat’s position
When own boat tracks off the plotter display, the own boat mark is automatically re-
turned to the screen center. You can also return it manually by pressing and holding
the ENT key for more than three seconds.
Bearing from
own boat to cursor
Range from
own boat to cursor
Cursor position in
latitude and longitude
Own boat’s mark
COG line
Cursor 92