Furuno GP-33 - Manual (Page 79)

9. INSTALLATION
9-11
Output setting
1. Press the MENU/ZOOM key twice to show the main menu.
2. Select [I/O Setup], then press the ENT key.
3. Select [Data 2], [Data 3] or [NMEA0183 Version] depending on the equipment
connected.
4. Press the ENT key. One of the following screens appears depending on the item
selected at step 3.
5. Press S or T to select the option.
REM1, 2: Output data to radar, echo sounder.
AP: Output data to an autopilot.
GPS: Output GPS data (used for the service)
2.0, 3.0: select the NMEA version of external equipment. If you are unsure of the
version number, try both and select the one which successfully outputs data.
6. Press the ENT key.
7. Press the MENU/ZOOM key twice to close the menu.
㵰㪛㪸㫋㪸㪉㪆㪛㪸㫋㪸㪊㵱 㵰㪥㪤㪜㪘㪇㪈㪏㪊㩷㪭㪼㫉㫊㫀㫆㫅㵱