Furuno GP-33 - Manual (Page 47)

6. ALARMS
6-3
2. Select [Alarms], and press the ENT key.
3. Select an alarm item, and press the ENT key.
4. Do one of the following:
(Arrival/Anchor)
1) Select [Arrival] or [Anchor], and press the ENT key.
2) Press
X and ENT key.
3) Enter the alarm area, and press the ENT key.
(XTE, Speed, Trip and Odometer)
1) Select [On], and press the ENT key.
2) Press
X and ENT key.
3) Enter the value, and press the ENT key.
(WAAS)
Select [On], and press the ENT key.
(Time)
1) Select [On], and press the ENT key.
2) Press
X and ENT key in order.
3) Enter the time, and press the ENT key.
4) For 12-hour clock, press X and ENT key.
5) Select [AM] or [PM], and press the ENT key.
(Speed Based Output)
1) Select [On], and press the ENT key.
2) Press
X and ENT key.
3) Enter the speed at which to close the contact signal, and press the ENT key.
4) Press
T and ENT key.
5) Enter the speed to open the contact signal, and press the ENT key.
5. Press the MENU/ZOOM key twice to close the menu.
Note 1: To cancel an alarm, select [Off] at 1) on step 4.
Note 2: You can activate the arrival alarm or the anchor watch alarm; they cannot be
activated together.