Frymaster D - Manual (Page 35)

DECATHLON SERIES GAS FRYERS
CHAPTER 1: SERVICE PROCEDURES
1-30
1.7.8 Replacing the Frypot (cont.)
31. Using a sharp knife or box-cutter, cut the
silicon seal between and in front of the
two frypots (two-vat or more). Use care
not to scratch stainless steel surfaces.
32. Remove frypot from fryer by lifting up
and out.
33. Position the frypot upside down on a
suitable work surface.
34. Record position of the valve stem in relation
to the frypot prior to removing the drain
valve. If equipped, remove microswitches
and mounting hardware from valve prior to
removal. Using a suitable wrench, remove
the drain valve from the frypot. Use Loctite
PST567
sealant when installing drain valve
on replacement frypot.
35. Reverse the above steps to install the
replacement frypot.
Lifting frypot from fryer.
Cutting frypot seal prior to frypot removal.
Removing drain valve from frypot.