Fluke 1552A EX - Manual (Page 22)

1551A Ex/1552A Ex
Calibration Manual
12
To change the batteries, see Figure 1:
1. Use a flat-blade screwdriver to remove the battery door screw.
2. Remove the battery door to access the three AAA batteries.
3. Replace only with approved AAA batteries listed in this document. See Table 11.
Any substitution voids the Product safety rating.
4. Make sure the battery polarity is correct.
5. Replace the battery door and install the screw.
gjo003.eps
Figure 1. Battery Replacement
Table 11. Approved Batteries
Battery Manufacturer Type
Duracell LR03/MN2400
Rayovac LR03/824
Energizer LR03/E92
Alkaline AAA
Panasonic LR03X