Grizzly H6331 - Manual (Page 10)

Model h6331 hVhp spray gun set -10 -
section 4: operations
the Model h6331 spray gun set is
designed to spray low to medium viscos-
ity liquids, like lacquers, stains, primers,
multi-component paints, acrylics, epoxies,
etc. it is ideal for auto body touch-ups,
woodworking projects, or projects with
hard to reach areas.
to use your spray gun:
1. read and follow the material man-
ufacturer's instructions for spray-
ing, mixing, safety, disposal, and
any other instruction on the label or
Material safety data sheet (Msds).
2. ensure the reservoir is securely tight-
ened and all other fittings are secure
to avoid air leaks or material spills.
3. set the inlet air pressure (the air com-
ing to the spray gun) to the lowest
pressure recommended in
machine
data on page 7 or to the material
manufacturer's
recommendations,
then adjust higher as necessary.
4. adjust the atomizing cap to vertical
or horizontal. refer to atomizing
cap and fan adjustments on page
on
page 12 for further explanation.
5. using a paint strainer, fill the res-
ervoir with the liquid to be sprayed.
note: Trial and error are necessary
to achieve the results you want along
with a fair amount of practice. Test
your material flow and spray pattern
on a piece of cardboard or some scrap
of material similar to your project.
eXplosion hazard! do not
smoke or have any source of flame
or spark near spraying. vapors will
explode if ignited.
respiratory hazard! always use
a niosh approved respirator when
using spray equipment. failure to
protect your lungs can lead to respi-
ratory illness and nervous system
damage.
toXic fumes! always use an
approved spray booth or well ven-
tilated area when spraying. never
spray in an confined space where
toxic fumes and flammable vapors
can accumulate to deadly levels.
spraying