Grizzly H6331 - Manual (Page 7)

Model H6331 HVHP Spray Gun Set -7 -
SECTION 2: INTRODUCTION
We are proud to offer the Grizzly Model
Model H6331 HVHP 2-Pc Spray Gun Set.
This model is part of a growing Grizzly fami-
ly of fine power tools. When used according
to the guidelines set forth in this manual,
you can expect years of trouble-free, enjoy-
able operation and proof of Grizzly’s com-
mitment to customer satisfaction.
It is our pleasure to provide this manual
with the Model H6331. It was written to
encourage safety considerations and guide
you through general operating procedures
and maintenance.
The specifications, details, and photographs
in this manual represent the Model H6331
as supplied when the manual was pre-
pared. However, owing to Grizzly’s policy
of continuous improvement, changes may
be made at any time with no obligation on
the part of Grizzly.
Foreword
Machine Data
If you have any comments regarding this
manual, please contact us:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: [email protected]
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
Contact Info
Read the manual before operation.
Become familiar with this tool, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety or
operational information is not under-
stood or followed.
Large HVHP Spray Gun
Type ..................................HP Siphon Feed
Fluid Tip .......................................... 1.8 mm
Air Consumption .....................6.0–8.8 CFM
Inlet Air Pressure ..........3–4 Bar/43–58 PSI
Material Capacity ...................1L / 33.8 fl oz
Maximum Pattern Width ........ 180–230 mm
Small HVHP Spray Gun
Type ..................................HP Siphon Feed
Fluid Tip .......................................... 1.4 mm
Air Consumption .....................4.2–6.5 CFM
Inlet Air Pressure ..........3–4 Bar/43–58 PSI
Material Capacity ...............200ml / 6.8 fl oz
Pattern Width .......................... 130–180mm