GE 29897 - Manual (Page 12)

12
2. When finished, press ENTER to confirm. Now you’re ready to enter the month.
M
ONTH
1. Use NEXT or REVIEW to set the month.
2. When finished, press ENTER to confirm. Now you’re ready to enter the day.
D
ATE
1. Use NEXT or REVIEW to set the date.
2. When finished, press ENTER to confirm.
TIP: You can use the keypad as a shortcut to enter the time/date information. For
example, to enter 8:09 a.m. 7/4:
1. Press 08.
2. Press 09.
3. Press 1 (for a.m.).
4. Press 07.
5. Press 04.
6. Press ENTER.
S
ETTING
Y
OUR
L
OCAL
A
REA
C
ODE
1. If you just adjusted the Time/Date menu, skip to step 2. If you haven’t adjusted any other
setting, press and release the MENU button until LOCAL AREA CODE is displayed.
2. Use NEXT or REVIEW to select the first digit.
3. Once the first digit is set, press ENTER.
4. Repeat steps 2-3 until all the digits of the area code are set.
5. When finished, press ENTER to confirm. The unit beeps.
NOTE: To skip to the next setting, press MENU. To exit setup, press EXIT.
TIP: You can use the keypad to enter all the digits in one step. To enter 317, press 3,1, and 7.
Then press ENTER.