GE 29897 - Manual (Page 24)

24
5. When finished, press STORE. MEMORY LOCATION is displayed.
6. Press the memory location number (0-9 or A, B, C) to store the number.
Example:
To store 1 123 555 1211 Al Smith, you would do the following:
1. Press 1; press NEXT; press 1; press 2; etc.
2. When finished, press STORE.
3. To enter the name, press 2; press NEXT; press 5 (three times); press NEXT (two times); press 7
(four times); etc.
4. When finished, press STORE.
5. Press the memory location number (0-9 or A,B,C) to store.
S
TORING
C
ALLER
ID R
ECORDS
You can also store Caller ID records in memory. Rather than re-entering the information the
traditional way, you can store the record in a memory location or quick dial button.
1. Use the NEXT or REVIEW buttons to scroll to the Caller ID record you want to store. Press
DIAL button to change the format (11 or 10 or 7 digits number format) as desired.
2. Press STORE.
3. Press the memory location number (0-9 or A, B, C) to store the record.
I
NSERTING A
P
AUSE IN THE
D
IALING
S
EQUENCE
Press the REDIAL/PAUSE button to insert a delay in the dialing sequence of a stored
telephone number when a pause is needed to wait for a dial tone (for example after you dial
9 for an outside line, or to wait for a computer access tone). Each pause is represented as
"P" on the display and counts as 1 digit in the dialing sequence.
C
HANGING A
S
TORED
N
UMBER
Use the same procedure to change a stored number as you do to store a number–you’re just
replacing the phone number with a different one.
D
IALING A
S
TORED
N
UMBER
1. Pick up the handset or press SPEAKER.
2. Press DIAL/ENTER. MEMORY DIAL=? is displayed.