GE 29897 - Manual (Page 15)

15
2. Use NEXT or REVIEW to set the first digit.
3. Press ENTER. The next digit flashes.
4. Repeat steps 2-3 until all the digits of the regional area code are set.
5. When finished, press ENTER to confirm. The unit beeps.
NOTE: If you don’t want to enter any more area codes, press MENU. To exit setup,
press EXIT.
NOTE: You can use MENU at any time to scroll through the settings. Also, if you don’t
make a selection within 30 seconds, the unit automatically exits the setup menu.
TIP: You can use the keypad to enter all the digits in one step. To enter 891, press 8,9, and 1.
Then press ENTER.
M
ESSAGE
V
OLUME
Use the VOLUME ^ and v buttons to adjust the volume when playing back messages and
while reviewing or changing the setting.
R
INGER
V
OLUME
Use the VOLUME ^ and v buttons to adjust the loudness of the ringer when the handset is
not in use. The phone gives a sample ring when adjusting.
H
ANDSET
V
OLUME
Use the VOLUME ^ and v buttons to adjust the handset listening volume while it is in use.
S
PEAKERPHONE
V
OLUME
Use the VOLUME ^ and v buttons to adjust the speakerphone listening volume while it is in use.
A
NSWERER
O
PERATION
C
ALL
A
NSWERING
When a call comes in, the unit will ring the number of times set, play the greeting, and record
the incoming call.
You can:
• Answer the call before the unit answers.
• Pick up the phone during the greeting.