Grizzly G0658 - Manual (Page 15)

Models G0657/G0658 (Mfg. Since 5/13)
-13-
SECTiON 3: SETuP
Wear safety glasses dur-
ing the entire setup pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
The Model G0657/G0658
is a heavy machine. DO
NOT over-exert yourself
while unpacking or mov-
ing your machine—get
assistance.
the Model g0657/g0658 was carefully packed
when it left our warehouse. if you discover the
machine is damaged after you have signed
for delivery, please immediately call Customer
Service at (570) 546-9663 for advice.
save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
unpacking
inventory
Box Contents: (figure 3) Qty
A. benchtop lathe (not shown) ..................... 1
B. Knockout bar .............................................. 1
C. safety glasses ........................................... 1
D. spur Center Mt#2 ...................................... 1
E. live Center Mt#2 ....................................... 1
f. hex Wrenches 2.5, 3, 6mm ...............1 each
figure 3. box contents.
b
d e
C
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them, or
for the sake of expediency, replacements can be
obtained at your local hardware store.
figure 4. additional contents (g0658 only).
g
h
i
Additional Contents (G0658 only): Qty
G. Flat Washers 3 ⁄
8
" ......................................... 3
H. lock handles.............................................. 3
i. outboard turning attachment .................... 1
F