Grizzly G0658 - Manual (Page 32)

-30-
Models G0657/G0658 (Mfg. Since 5/13)
SECTiON 5: ACCESSORiES
aCCessories
D1090—3-Jaw Chuck
a "must have" for the serious wood turner. this
3-jaw chuck is a self-centering style chuck used
mostly for round work. all three jaws tighten
together at the same time. Jaws are reversible for
expanded work holding capacity. Threaded insert
required for mounting!
figure 43. Model g1090 3-Jaw Chuck.
D1089—4-Jaw Chuck
another "must have" for the serious wood turner.
this 4-jaw chuck is an independent type chuck
that is used for square and odd-shaped pieces.
each jaw tightens individually and can be turned
around to hold larger dimension workpieces.
Threaded insert required for mounting!
figure 44. Model d1089 4-Jaw Chuck.
figure 45. Model h6542 robert sorby 8-pC set.
H6542—Robert Sorby HSS 8-PC Turning Set
G1676—Drill Chuck Arbor MT#2 x JT#3
H6204—Precision Drill Chuck
1 ⁄
32
"– 5 ⁄
8
" x JT#3
H3102, H3103, H3104—Gouge Slipstones
H1064—6-PC Deluxe HSS Lathe Chisel Set
G9863—8-PC HSS Lathe Chisel Set
H0507—20" Swan Neck Hollowing Tool
H0508—24" Swan Neck Hollowing Tool
G1098—1" x 8 TPi RH Threaded insert.
this threaded insert is required to mount a 3- or
4-jaw chuck to your wood lathe.
installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
order online at www.grizzly.com or call 1-800-523-4777