GE 10-95 CG - Manual (Page 30)

30
OPERATING THE SELF-CLEANING OVEN
(continued)
How to Set Delay Start of Cleaning
Delay Start is setting the oven timer to start the clean
cycle automatically at a later time than the present
time of day.
NOTE: Before beginning, make sure the oven clock
shows the correct time of day.
1. Follow steps to prepare the oven for cleaning.
2. Slide the latch handle to the
right as far as it will go.
Never force the latch
handle. Forcing the handle
will damage the door lock
mechanism.
3. Press the AUTO SELF CLEAN pad.
4. Press the + or – pad to enter the
Clean Time.
5. Press the STOP TIME pad. “STOP
TIME” and the earliest Stop Time you
can set will appear in the display.
The earliest Stop Time will be the Clean Time
selected plus the time of day. For example: If the
Clean Time is 3 hours and the time of day is 6:00, the
Stop Time that appears in the display will be 9:00.
6. Press the + pad to change the Stop Time
to a later time of day if desired. For
example: If you set Stop Time at 11:00,
oven will start clean cycle at 8:00 and end
at 11:00. The door latches automatically.
The self-clean cycle will automatically begin after
“CLEAN” is displayed and the time for clean cycle
is set. The words “ON” and “LOCK” will appear
on the display. It will not be possible to open the
oven door until the temperature drops below the
lock temperature and the LOCK light goes off.
7. When the LOCK light is off, slide the latch handle
to the left as far as it will go and open the door.
+
STOP
TIME
+
–
AUTO SELF
CLEAN
Quick Reminder:
1. Latch the door.
2. Press the AUTO SELF CLEAN pad.
3. Press the + or – pad until desired Clean
Time appears.
4. Press the STOP TIME pad.
5. Press the + or – pad until the desired Stop
Time appears in the display.