GE DPGT750 - Manual (Page 34)

Installation Instructions
34
DRYER STARTUP
Press the POWER button.
FINAL SETUP (cont.)
POWER
NOTE: If the dryer has been exposed to
temperatures below freezing for an extended
period of time, allow it to warm up before
pressing POWER. Otherwise, the display will
not come on.
The dryer is now ready for use.
SERVICING
WARNING –
Label all wires
prior to disconnection when servicing
controls. Wiring errors can cause improper
and dangerous operation after
servicing/installation.
For replacement parts and other information,
refer to the Owner’s Manual for servicing
phone numbers.
4