Installation instructions, Reversing the door swing (cont.) – GE DPGT750 User Manual

Page 36

Advertising
background image

Installation Instructions

36

REVERSE HANDLE

REVERSING THE DOOR SWING (cont.)

Install the handle on the opposite side of
the door.

5

REMOVE HINGES AND REHANG
DOOR

Remove the hinges from the door and install
them on the opposite side with the hinge pin
toward the outside of the door.

6

REMOVE HINGES AND REHANG
DOOR (cont.)

Insert the door on the opposite side of the
opening by moving the door IN and DOWN
until the top hinge and the bottom hinge are
resting on the top screws inserted in Step 2.

6

Remove the remaining screws from the
side of the opening from which the door
was removed. With these screws, secure
each hinge at the bottom.

Rear of Door

Opposite Side of
Door

Tighten the two top screws of each hinge.
Reinsert the plastic plugs on the side from
which the door was removed.

Advertising