Grizzly G0459P - Manual (Page 28)

-26-
Model G0459/G0459P (Mfg. 7/11+)
failure to routinely inspect your drum sander
for damage and wear could result in unsatis-
factory work results, premature component
or machinery failure, or operator injury. We
recommend you create a checklist for routine
inspection and maintenance. Remember to
always disconnect the drum sander from its
power source before attempting to inspect,
adjust, or repair this machine!
figure 22. location to lubricate pillow block
bearing.
Pillow block bearings
these must be lubricated every 20 hours of
operation. use a grease gun to pump one or two
shots of a high-quality grease into each grease fit-
ting (
figure 22), located on the top of each pillow
block bearing.