Grizzly G0503 - Manual (Page 29)

Model G0503 (Mfg. Since 12/08) -27-
Eyes, lung, and ear damage could result
from using this machine without proper
protective gear. Always wear safety glasses,
a respirator, and hearing protection when
operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
SEcTION 4: OpERATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLy REc-
OMMEND that you read books, trade maga-
zines, or get formal training before using
this machine. Regardless of the content in
this section, Grizzly Industrial will not be
held liable for accidents caused by lack of
training or knowledge.
always make sure that any stock you plan on cut-
ting is clean and free of nails, staples, or embed-
ded stones.
Keep in mind that precision cuts require a more
extended preparation process than rough cuts.
To prepare the workpiece for a precision cut:
1. Surface plane the workpiece on a joint-
er—the concave face of the workpiece
should be planed flat on a jointer.
2. Surface plane the workpiece on a thick-
ness planer—the opposite face of the
workpiece should be planed flat with a thick-
ness planer.
3. Edge joint the workpiece on a jointer—
the concave edge (viewed from end-to-end)
of the workpiece should be edge jointed flat
on a jointer. this flat edge will glide along the
fence rollers during the resaw operation.
Stock preparation