Grizzly G0503 - Manual (Page 7)

Model G0503 (Mfg. Since 12/08) -5-
f. Main Motor—drives the saw wheels for
blade movement and drives the hydraulic
pump for conveyor movement.
G. Hydraulic System Oil cooler—Cools the
hydraulic fluid for the hydraulic system.
H. Hydraulic fluid filter—removes contami-
nating particles from the hydraulic fluid.
I. Hydraulic Tank—holds and cools the
hydraulic fluid.
J. Hydraulic pump—Creates hydraulic oil flow
which drives the conveyor motor.
K. Hydraulic conveyor Motor—utilizes the
hydraulic fluid flow from the hydraulic pump
drive motor to move the conveyor belt.
L. Head Elevation Handwheel—Moves the
head (the part of the saw that contains the
wheels and blade) up or down as needed.
M. Electrical control Box—Main area for wir-
ing, rewiring, and changing the fuses. should
never be opened when the machine is con-
nected to the power source!
N. Blade Elevation Gauge—shows the blade
height.
O. Blade Tensioner—provides a mechanical
means for properly tightening the blade.
p. 4" Dust port—Connection point for a dust
collection system.
Q. conveyor Belt controls—Controls on/
oFF and conveyor speed.
figure 2. Back and side views of machine features and controls.
F
i
J
l
M
n
o
Q
g
h
K
p