Grizzly Model G8027 - Manual (Page 12)

-10- G8027 1 HP Dust Collector
After all the parts have been removed from the
two boxes, you should have the following items:
Box Components (Figure 3) Qty
A. Motor/Impeller Housing .............................. 1
B. Collector ...................................................... 1
C. Base Plate .................................................. 1
D. Bags ............................................................ 2
E. Rubber Gasket ........................................... 1
F. Swivel Casters ............................................ 4
G. Collection Bag Support Rods .................... 2
H. Upper Bag Support Rod ............................. 1
I. Bag Clamps ................................................ 2
J. Impeller Housing Support ........................... 1
K. Hardware and Tools (Not Shown)
— Hex Bolts M6-1 x 15 .............................. 6
— Hex Bolts M8-1.25 x 15 ......................... 8
— Hex Nuts M8-1.25 .................................. 4
— Hex Nut M5-.8 ..................................... 18
— Flat Washers 8mm .............................. 12
— Flat Washers 5mm .............................. 22
— Phillips Head Screws M5-.8 x 15 .......... 6
— Phillips Head Screws M5-.8 x 10 ........ 16
— Phillips Head Screws M4-.7 x 8 ............ 2
— Hex Wrench 5mm ................................. 1
— Hex Wrench 4mm ................................. 1
In the event that any non proprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or, for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
Unsupervised children and
visitors inside your shop
could receive serious per-
sonal injury. Ensure child
and visitor safety by keep-
ing all entrances to the
shop locked at all times.
DO NOT allow unsuper-
vised children or visitors
in the shop at any time.
Working Clearances
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location
for the machine. See
Figure 4 for the footprint
dimensions of the Model G8027.
Figure 4. Dust collector footprint.
Site Considerations
Figure 3. Main box items.
A B
C
D
E
G
J
I
H
F
Inventory
28"
16"