Group tab – GE v6 User Manual
Page 180
Secure Perfect 6.1.1 User Manual
178
take effect.
Yes Yes
Updating remote Regions: Wait for
replication interval and then perform a
database download. Applies to adds and
deletes.
Yes
Yes
No action required.
No No
Yes
Yes
No action required.
Yes
Yes
Editing a micro in a remote Region: Wait
for replication to occur and then perform a
database download to that micro. If the
user changes the host name to a remote
client, wait for replication to occur and then
restart the hosting client’s services.
Adding a micro in a remote Region: Wait
for replication to occur and then restart
services on the remote client.
Yes Yes
Updating remote Regions: Wait for
replication interval and then perform a
database download. Applies to adds and
deletes.
Yes
Yes
No action required.
No
N/A
Yes Yes
Updating remote Regions: Wait for
replication interval and then perform a
database download. Applies to adds and
deletes.
No
N/A
All tour points must be associated with
micros within the same Region.
Group Tab
Alarm Group Form
Use this tab to schedule when the alarms in the group are monitored or when to print alarm transactions
by assigning previously defined time schedules to alarm groups.
Number: This is a read-only field. Displays the number of the alarm group.
Micro: This is a read-only field. Displays the description of the micro on which this alarm group is located.
Monitoring
•
Time schedule: Select a time schedule from the drop-down list.
•
On/Off: Select On if the above schedule is when you want to monitor the alarm group or Off if
the above schedule is when you do not want to monitor alarms belonging to this alarm group.
Print Alarm
•
Time schedule: Select a time schedule from the drop-down list.
•
Yes/No: Select Yes if the above schedule is when you want to print alarms belonging to this
alarm group or No if the above schedule is when you do not want to print alarms belonging to
this alarm group.