Alarm monitoring, Overview, Alarm monitor form – GE v6 User Manual
Page 31
Secure Perfect 6.1.1 User Manual
29
contact information.
Magnification
Slide to zoom out or zoom in, on the map view currently displayed.
Once you have zoomed in or increased the size of the map, the
navigation bars on the side and bottom of the map windowpane
become available. To return the map to the original size, use the
magnification slide.
Map Taller
Click to change the width to height ratio; the map displays as taller and
the width narrows.
Map Shorter
Click to change the width to height ratio; the map becomes shorter and
spreads in width.
•
The Secure Perfect Viewer application window opens with a maximized Alarm Graphics Viewer Form
window inside. Click the controls in the top-right corner of the Alarm Graphics Viewer Form window to
minimize, return to maximized, or close. To reopen, select Alarm Graphics Viewer from the Secure
Perfect Viewer toolbar, Operations menu.
•
Select a map from the Map drop-down list to display in the Viewer windowpane. The Viewer
application is limited to one windowpane. For
, move your mouse pointer to
an assigned point and right-click. The menus that display with a right-click mouse button depend on
the Point Type assigned.
•
If another map is linked to an icon, click the icon to display the linked map.
•
Click the controls in the top-right corner of this window to minimize, return to maximized, or close the
Secure Perfect Viewer window.
Alarm Monitoring
Overview
Reference Topics:
Alarm Monitoring Using the Alarm Monitor
Alarm Monitor
The Alarm Monitor Form displays alarm activity.
•
An operator can see alarms on the Alarm Monitor Form only for facilities that are currently active
and assigned to the current operator.
•
The option to monitor an alarm must be selected on the Alarm Form in order for a specific alarm to
display on the Alarm Monitor Form.
•
Alarms do not display on the Alarm Monitor Form if the selection to monitor an alarm is removed,
even though Alarm Routing and Bumping may be configured.
All responses can be obtained from the Administration Report, with ‘Response’ as the selected report
type.