Gefen GEF-3GSDI-16416 - Manual (Page 12)

9
The Standby Screen
The front panel of the 16x16 3GSDI Matrix has a 16 character 2 line LCD display.
This display will shows the current routing status of the Matrix and will be used to
perform routing commands and other operations. After the unit is powered on,
the Standby Screen will be displayed:
Displaying the Firmware Version
Press the ◄ button to display the firmware version:
Displaying the Boot Loader Version
Press the ◄ button again to display the boot loader version:
Press the ◄ button once more to return to the Standby Screen.
NOTE: The Cancel button can be pressed at any time to return to the Standby
Screen.
CONNECTING AND OPERATING THE 16X16 3GSDI MATRIX