Rs-232 serial commands – Gefen GEF-3GSDI-16416 User Manual
Page 27
Advertising
![background image](/manuals/109754/27/background.png)
24
RS-232 SERIAL COMMANDS
S Command
The S command routes a single input to all 16 3GSDI outputs.
Syntax:
s param1
Parameters:
param1
Input
[1
-
16]
Notes
:
Setting param1 to a value of 0 will place the matrix in one-to-one mode. This
means that Input 1 will be routed to Output 1, Input 2 will be routed to Output 2,
and so on.
Advertising