Gefen GEF-3GSDI-16416 - Manual (Page 24)

21
RS-232 SERIAL CONTROL
General Functions
Function Description
#ACTIVEBOLO
Enables the boot loader
#FADEFAULT Sets IP Confi gurations to default settings
#RMTIRADD Set the remote IR channel
#RSTIP
Sets IP confi guration to default
#ACTIVEBOLO Function
The #ACTIVEBOLO function enables the boot loader. See the boot loader
instructions on page 28.
Syntax:
#ACTIVEBOLO
Parameters:
None
Notes:
This command must be typed twice in order to activate the boot loader.
#FADEFAULT Function
The #FADEFAULT function sets all inputs and outputs to factory (default)
settings.
Syntax:
#FADEFAULT
Parameters:
None
Notes:
The #FADEFAULT function will set the default routing state: Input 1 - Output 1,
Input 2 - Output 2, Input 3 - Output 3, and so on.