Gefen GEF-3GSDI-16416 - Manual (Page 13)

10
CONNECTING AND OPERATING THE 16X16 3GSDI MATRIX
Switching between RS-232 and RS-485 Protocols
Press the ► button to display the serial interface selection screen:
Use the ◄ or ► buttons to switch between RS-232 and RS-485 serial protocols.
The current selection is indicated by the cursor. In the example above, RS-232 is
the currently selected protocol.
Once the protocol has been selected, press the Select button to save the
changes.
RS-232
If the RS-232 protocol is selected, the LCD will show the following:
Press the Cancel button to return to the Standby Screen.
RS-485
If the RS-485 protocol is selected, another screen will be displayed asking to
specify whether or not the cable is terminated:
Use the ◄ or ► buttons to switch between TERMINATION Off and
TERMINATION On, then press the Select button to save the changes.