GE 25898A - Manual (Page 14)

14
M
EMORY
F
ULL
When the answering system memory is full, the system answers after 10
rings. You should erase some messages so the answering system may record
new messages.
E
RASING
M
ESSAGES
You may erase messages three ways: one message at a time from the
base; all messages from the base; or one message at a time from the
handset or a phone in another location.
1. To erase one message at a time from the base:
• Press play/stop. The message plays.
• Press and release the delete button.
2. To erase all reviewed messages from the base:
• Press and hold the delete button until the unit beeps.
3. To erase a message from the handset:
• Press format/answerer button to enter into the handset remote
access operation.
• Press play/stop on the handset (the 2 button). The message plays.
• Press erase (the 0 button) to erase the message during
message playback.
NOTE: Erased messages cannot be restored.
L
EAVING A
M
EMO
Use the memo feature to leave a message.
1. Press and hold the memo button on the base. You must hold the button
until you finish recording the memo.
2. Begin speaking after you hear the beep.
3. Release the memo button when finished.