GE 25898A - Manual (Page 31)

31
• The handset may be out of range of the base. Move closer to the base.
• Make sure the battery is properly charged (12 hours).
• Make sure the battery pack (in the handset) is properly installed.
• The handset should beep when you press the talk/callback button, and
the charge/in use indicator on the base should be lit when the handset
rests in the cradle. If not, the battery may need to be charged.
• Place the handset in the base for at least 20 seconds to reset the unit.
Handset does not ring
• Make sure the RINGER switch on the handset is turned to ON.
• The handset may be out of range of the base. Move closer to the base.
• You may have too many extension phones on your line. Try unplugging
some phones.
• Check for dial tone.
You experience static, noise, or fading in and out
• Change channels.
• The handset may be out of range of the base. Move closer to the base.
• Relocate the base. Make sure the base is not plugged into an outlet with
another household appliance.
• Charge the battery.
Unit beeps
• Place handset in base for 20 seconds; if it still beeps, charge battery for
12 hours.
• Clean charging contacts on handset and base with a soft cloth or an eraser.
• See solutions for “No dial tone.”
• Replace battery.
Memory Dialing doesn't work
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?