GE 25898A - Manual (Page 15)

15
T
ELEPHONE
S
ET
U
P
P
ROGRAMMABLE
M
ENUS
There are four programmable menus available on the handset: Language,
Local Area Code, Ringer Tone and Factory Default. When you program
these settings, make sure the phone is OFF ( not in talk mode).
D
ISPLAY
L
ANGUAGE
1. Press the flash/prog button on the handset until 1 ENG 2 FRA 3 ESP
shows in the display.
2. Use the CID-VOL (- or +) buttons on the handset or the handset touch-
tone pad to select 1, 2, or 3.
3. Press the flash/prog button again.
NOTE: Press the *exit button once to keep the previous setting and return to
the standby screen.
L
OCAL
A
REA
C
ODE
1. Press the flash/prog button until AREA CODE - - - shows in the display. The
default is - - -.
2. Use the handset touch-tone pad to enter the area code.
3. Press the flash/prog button again.
NOTE: Press the *exit button once to keep the previous setting and return to
the standby screen.
NOTE: To restore the default setting to - - - , press and release del/chan when
AREA CODE shows in the display.
R
INGER
T
ONE
1. Press the flash/prog button until RINGER TONE > 1 shows in the display.
The default ringer tone is 1.
2. Use the CID-VOL (- or +) buttons on the handset or the handset touch-
tone pad to select 1, 2, or 3.
3. Press the flash/prog button again. You will hear a confirmation tone.
NOTE: Press the *exit button once to keep the previous setting and return to
the standby screen.