Hanging, Attery, Headset jack headset plug – GE 25898A User Manual
Page 27
27
2. Adjust the headset to rest comfortably on
top of your head and over your ear. Move
the microphone to approximately two to
three inches from your mouth.
3. Press the talk/callback button to answer a
call or make calls using
the headset.
4. To return to normal operation, unplug the
headset from the jack.
C
HANGING
THE
B
ATTERY
CAUTION:
To reduce the risk of fire or personal injury, use only the
battery 5-2548 that is compatible with this unit.
1. Make sure the telephone is OFF (not in TALK mode) before you replace
battery.
2. Remove the battery compartment cover.
3. Disconnect the cord attached to the battery pack from
the jack inside the battery compartment and remove the
battery pack from the handset.
4. Reconnect the battery pack and insert it in the
battery compartment.
5. Put the battery compartment cover back on.
6. Place handset in the base or handset charge cradle to
charge. If you don’t charge the handset battery properly
(for 12 hours) when you first set up the phone and/or
when you install a new battery pack, the battery’s long-term
performance is compromised.
NOTE:
If the battery is not properly installed in the handset, or if the
battery pack is not properly connected to the jack inside the battery
compartment, “NO BATTERY” shows in the display when the handset is
placed in the base cradle.
-
+
2
abc
5
jkl
8
tuv
0
oper
3
def
6
mno
9
wxy
z
#
pau
se
1
4
ghi
7
pqrs
*
exit
memory
mute
pro
g
chan
red
ia
l
fo
rm
at
flas
h
del
cancel
CID - VOL
talk
call back
Headset jack
Headset plug