GE 25898A - Manual (Page 32)

32
C
ALLER
ID S
OLUTIONS
No Display
• Charge the battery (for 12 hours). Or replace the battery.
• Make sure that the unit is connected to a non-switched electrical outlet.
Disconnect the power converter from the outlet and plug it in again.
• You must be subscribed to the standard Name/Number Caller ID service
from your local telephone company to receive CID information.
Caller ID Error Message
• The unit displays this message if it detects anything other than valid
Caller ID information during the silent period after the first ring. This
message indicates either the presence of noises on the line, or that an
invalid message has been sent from the telephone company.
A
NSWERING
S
YSTEM
S
OLUTIONS
Can’t hear messages, beep, etc.
• Adjust speaker volume.
Time/Day setting stuck at 12 a.m Mon.
• Set the time clock.
Answers on 10th ring
• Make sure answering system is turned on.
• Answering system memory may be full. Erase some messages.
Incoming messages are incomplete
• An extension phone may have been lifted as a message is received.
• Answering system memory is full. Erase some messages.
• You may have accidently pressed the play/stop button during playback
and stopped the message.
Won’t respond to remote commands
• You must use a tone-dial phone. This phone does not support pulse
(rotary) dialing.