Grizzly G0719 - Manual (Page 24)

-22-
model g0719 (mfg. since 10/10)
sECtiOn 6: MaintEnanCE
always disconnect power
to the machine before
performing maintenance.
failure to do this may
result in serious person-
al injury.
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily:
•
loose mounting bolts.
• Worn, loose, or damaged sanding disc.
• Worn or damaged power cord.
• Any other condition that could hamper the
safe operation of this machine.
• Wipe off the sawdust build-up from the table
surface.
Weekly Maintenance:
•
Vacuum out dust from the motor fan area and
from around the base of the machine.
Monthly:
•
repeat test run to ensure all safety fea-
tures are working correctly.
Long-term storage:
•
Keep unpainted surfaces rust free with heavy-
duty rust prevention compound.
schedule
Cleaning the model g0719 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. if any
resin has built up, use a resin dissolving cleaner
to remove it. treat all unpainted cast iron and steel
with a non-staining lubricant after cleaning and
periodically after use.
Cleaning
protect the unpainted cast iron surfaces on the
table by wiping the table clean after every use—
this ensures moisture from wood dust does not
remain on bare metal surfaces.
Keep tables rust-free with regular applications of
products like g96
® gun treatment, slipit ® , or
Boeshield ® t-9 (see section 5: accessories on
page 21 for more details).
unpainted Cast iron
Lubrication
this machine uses permanently lubricated ball
bearings. No bearing maintenance is required.
periodically apply a drop of oil to each of the table
pivot bolts.