Grizzly T10097 - Manual (Page 14)

Model t10097 (Mfg. since 07/08) -14 -
positioning the
universal support
the Model t10097 Wet grinder is
equipped with a universal support that
serves as a tool rest and as an attachment
point for task-specific accessories. it can
be attached in two positions, allowing for
grinding with or against the rotation direc-
tion of the grinding wheel. the tightening
knobs on each attachment point allow
the universal support to be adjusted and
locked in position, depending on the spe-
cific task required.
Working with the rotation yields much
more precise results and removes less
material. use this method for finer tools,
such as knives or carving tools.
Working against the rotation removes large
amounts of materials quickly but does not
yield precise results. use this method for
coarse tools such as axes.
grinding against Wheel
rotation
1. disConneCt grinder FroM
poWer!
2. position the machine with the on/oFF
switch facing you.
do not make adjustments while the
machine is running. disconnect the
grinder from power before attempting
to make adjustments to the universal
support, water reservoir, changing
wheels or the angle guide.
figure 6. vertical mount.
universal
support
vertical
Mounts
grinding
area
3. attach the universal support in the ver-
tical mounts as shown in figure 6. Be
sure it is securely positioned and will
not move during grinding. re-connect
the grinder to power.
3. rest your workpiece on the univer-
sal support with the sharpened edge
pointing away from you. grind your
workpiece in the indicated grinding
area.
the universal support should never
be placed in the vertical mounts
when using the leather stropping
wheel. Working against the direction
of rotation in this case will cause
severe damage to the leather wheel.
NOTICE