Grinding jig, Grinding with wheel rotation – Grizzly T10097 User Manual
Page 15
Model t10097 (Mfg. since 07/08)
-15
-
grinding With Wheel rotation
1. disConneCt grinder FroM
poWer!
2. position the machine with the on/oFF
switch facing away from you.
3. attach the universal support into the
horizontal mounts as shown in
figure
7. Be sure it is securely positioned
and will not move during grinding.
reconnect the grinder to power.
4. rest your workpiece on the univer-
sal support with the sharpened edge
pointing away from you. grind your
workpiece in the indicated grinding
area.
figure 7. horizontal mount.
universal
support
horizontal
Mounts
grinding
area
grinding Jig
the Model t10097 Wet grinder includes
a grinding jig for securing a variety of tools
during use.
to use the grinding jig:
1. disConneCt grinder FroM
poWer!
2. slide the grinding jig onto the universal
support as shown in
figure 8.
3. insert the tool into the jig clamp, as
shown in
figure 9, then use the angle
guide, as described in
angle guide on
page 15, to set the grinding angle.
figure 8. attaching grinding jig.
grinding
Jig
universal
support
4. once the grinding angle is set, tighten
both lock knobs (
figure 9).
5. re-connect the grinder to power and
perform the operation.
figure 9. Clamping tool.
lock
Knob
tool
(varies)
angle guide