Grizzly T10097 - Manual (Page 16)

Model t10097 (Mfg. since 07/08) -16 -
angle guide
the Model t10097 Wet grinder comes
with an angle guide to help identify and
maintain the cutting angle on a variety of
tools.
figure 10. Measuring notches.
to use the angle guide:
1. locate the eight measuring notches on
the angle finder ( figure 10).
desired
angle notch
Measuring
notches
Workpiece
angle edge
2. Find the angle notch that best fits the
tool you wish to grind by placing the
beveled edge of the workpiece into
each notch until you find the notch that
most closely matches the angle of the
beveled edge.
3. place the angle guide on the wheel
with the desired angle notch (found in
step 2) against the wheel and adjacent
to the universal support (
figure 11).
figure 11. angle guide usage.
desired
angle notch
Correct
grinding angle
4. adjust the positioning of the workpiece
and the universal support height as
necessary so that the sharpened edge
of the workpiece is flat against both the
grinding wheel and the angle edge on
the angle guide as shown in
figure 11.
For precision grinding attachments,
see
accessories on page 18.
angle edge
Workpiece