GE 21006 - Manual (Page 15)

15
1. Press the cid/vol (up and down arrow) button to move the cursor to
REGISTRATION.
2. Press the OK soft key and REGISTER HANDSET? shows in the display.
3. Press the OK soft key and HOLD BASE PAGE WAIT FOR BEEP shows in
the display.
4. Press and hold the page button on the base unit until you hear a
long tone at the handset. CONFIRM REGISTRATION? shows in the
handset display.
5. Press the OK soft key to confirm the registration. When handset
registration is complete, ENTER NAME shows in the display.
6. Enter the handset name.
NOTE: If you make a mistake, press the DEL soft key to backspace and erase
the wrong characters.
7. Press the OK soft key to save. You will hear a confirmation tone.
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu. Or press and hold the EXIT soft key to return to standby mode.
H
ANDSET
D
E
-R
EGISTRATION
Deregistration cancels a handset’s registration. If you do not know a
handset’s name, you should deregister the handset according to the steps
below. During the de-registration process, keep the handset near the base.
Make sure your handset is in menu mode.
WARNING: It is not recommended that a handset be de-registered unless
absolutely necessary because once a handset is de-registered, that handset's
telephone features cannot be used until the handset is re-registered.
1. Press the cid/vol (up and down arrow) to move the cursor to
DEREGISTRATION (if handset 1 is being de-registered).
2. Press the OK soft key and DE-REGISTER HANDSET 1? shows in the
display if handset 1 is being de-registered.