GE 21006 - Manual (Page 38)

38
C
ALLER
ID
No Display
• Be sure the battery is properly charged (for 12 hours). Or replace the battery.
• Make sure the unit is connected to a non-switched electrical outlet.
Disconnect the AC power supply from the base and reconnect it.
Caller ID Error Message
• The unit displays this message if it detects anything other than
valid Caller ID information during the silent period after the first
ring. This message indicates the presence of noise on the line.
No Caller ID
• Are you subscribed to Caller ID service from your local telephone
company?
B
ATTERY
If you experience any of the following problems, even after recharging the
battery, you may need to replace the battery pack:
• Short talk time
• Poor sound quality
• Limited range
• Charge indicator fails to turn on