GE 21006 - Manual (Page 24)

24
M
EMORY
The handset has memory dialing storage areas. Fifty 15-character names and
24-digit telephone numbers may be stored in the handset memory.
S
TORING
N
AMES AND
N
UMBERS IN
M
EMORY
1. Make sure the phone is OFF (not in TALK mode).
2. Press the DIR soft key to display SELECT MEMORY 01-50.
3. Press the desired memory location button (01 through 50). If the
memory location is occupied, the memory location and stored name
and number appear on the display. If the memory location is empty,
EMPTY appears in the display.
4. Press the EDIT soft key. The display shows ENTER NAME.
5. Use the handset number pad to enter a name (up to 15 characters). More
than one letter is stored in each of the number keys. For example, to enter
Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for
the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times
for the second letter L, and press the 1 key to insert a space between the
first and last name. Press the 7 key 4 times for the letter S; press the 6 key
once for the letter M; press the 4 key 3 times for the letter I; press the 8 key
for the letter T; press the 4 key twice for the letter H.
6. Press the OK soft key to confirm and save your selection. The display
shows ENTER TEL NUMBR.
7. Use the touch tone pad to enter the telephone number (up to 24 digits,
including pauses) and press the OK soft key again to save your
selection. The unit beeps to confirm.
NOTE: The system treats PAUSES as delays or spaces in the dialing sequence.
8. To enter another name and number in a different memory location,
please follow step 1 and repeat the process.